Version 5.00f
- new
	- support for the 1-10V-interfaces on the Expansion Box
- known Bugs
	- reading of the measurement storage with ProfiLuxControl not possible at present
- not yet supported
	- level inputs of the Expansion Box
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4
	- display of more than 8 illumination channels or sensors on ProfiLux
	
Version 5.00g
- new
	- reading of the measurement storage with ProfiLuxControl is possible again
	- port of webserver is adjustable
- known Bugs
	- none
- not yet supported
	- level inputs of the Expansion Box
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4
	- display of more than 8 illumination channels or sensors on ProfiLux

Version 5.00h
- new
	- values of all sensors (except level) and illumination channels shown on display
	- S/N-problem with ProfiLux/PAB fixed
	- firmware update over ProfiLuxControl optimized
	- monitoring of PAB-communication, communication error creates a sensor alarm
	- range of desired temperature extended (for use with ponds)
	- wave duration for current pumps adjustable in 0.01 ms steps
	- Aqua Illumination-model selectable
- known Bugs
	- none
- not yet supported
	- level inputs of the Expansion Box
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4

Version 5.00i
- new
	- reminder texts are shown more frequently
	- files can be downloaded from the webserver with TFTP-GET
	- webserver supports XML files
	- better communication with intelligent cards (like PLM-DALI or PLM-4L)
	- cloud simulation optimized
- known Bugs
	- none
- not yet supported
	- level inputs of the Expansion Box
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4

Version 5.00j
- new
	- display of level, moon phase and pump state possible
	- level inputs of Expansion Box can be used
- known Bugs
	- none
- not yet supported
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4

Version 5.00k
- new
	- problem with detection of intelligent cards when ProfiLux View is connected fixed
	- improvement of PC-connection speed and stability
	- problem with auto. dosing when using timer above nr. 8 fixed
- known Bugs
	- none
- not yet supported
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4
	
Version 5.00l
- new
	- behaviour of current pumps while inactivity selectable: Off or Minimum
	- programmable logic: Function XOR added
- known Bugs
	- none
- not yet supported
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4

Version 5.00m
- new
	- support for SMS unit
- known Bugs
	- none
- not yet supported
	- analysis of the measured currents in Powerbar-PAB
	- settings with Webserver, at present oly status display
	- several network services
	- PAB-administration over ProfiLuxControl, now only on the device
	- 16 current pumps, at present only 4